SIO-2® Zumaia Gray Sculpture High Fire Ceramic Clay Body, 4 lb Sample
$7.95USD
In Stock
- Brand: SIO-2®
- Model #: SIO2-ZUMAIA-GRAY-4
Most products ship within 1 business day. Learn More
SIO-2® Zumaia Gray Sculpture High Fire Ceramic Clay Body, 4 lb Sample
Grey sculpture clay with 40% fine grog 0-0.5 mm (up to 35 Mesh). Formulated for artistic and decorative ceramics, it is ideal for sculpture and pieces for outdoors (garden pots, tiles, etc.). The high content of grog confers a beautiful textured surface and an excellent behaviour during drying and firing. Depending on the firing temperature, it develops an interesting range of greys, from cement to dark grey, which satisfies the most avant-garde trends in artistic and decorative ceramics. Available in a convenient 4 lb package for smaller projects, or to test and see if this is the right clay for you.
TECHNICAL SPECIFICATIONS:
Firing range: 2192-2372°F / Cone 5-10
Biscuit temperature: 1855°F / Cone 06
Water content: 17%
Plasticity (IP Atterberg): 16
Carbonate content (CaCO3): 0%
Drying shrinkage: 5.3%
Firing shrinkage at Cone 10: 4.3%
Porosity at Cone 10: 4.5%
Dry bending strength: 2.8 N/mm2
Fired bending strength at Cone 10: 37.8 N/mm2
Thermal coefficient (α25-500°C): 61.6x10-7°C-1
Firing range: 1200-1300ºC / Cone 5-10
Biscuit temperature: 1000ºC / Cone 06
Water content: 17%
Plasticity (IP Atterberg): 16
Carbonate content (CaCO3): 0%
Drying shrinkage: 5.3%
Firing shrinkage 1300ºC: 4.3%
Porosity (water absorption) at 1300ºC: 4.5%
Dry bending strength: 2.8 N/mm2
Fired bending strength (1300ºC): 37.8 N/mm2
Thermal coefficient 1250ºC (25-500ºC): 61.6x10^-7ºC^-1
Storage: Protect ceramic clay bodies from direct sunlight, avoiding excessive temperature changes and protect from frost.
Use: Technical details are available with information on the characteristics of each product and its use. It is recommended to test clay body prior to large scale use in order to verify suitability in both the ceramic process (shaping, drying, firing and decoration) and the final application that is expected to be obtained.
Safety: All SIO-2® clay bodies are certified by the Art & Creative Materials Institute (ACMI) and conform to ASTM D-4236 safety guidelines.
From the manufacturer of SIO-2®:
CERAMICA COLLET S.A.
Always in your hands
Founded in 1874, our company manufactures ceramic clay bodies for industry, pottery and artistic ceramics, and natural clay for crafts, fine arts and education.
Our target is to innovate, developing products made with natural clay which, in many applications, satisfy the high requirements of our customers. Our Quality System, certified according to ISO 9001:2008, is the setting for continuous improvement. Social responsibility, respect, and care for the Environment are two fundamental points in the philosophy of our firm.
The AP Seal identifies art materials that are safe and certified in a toxicological evaluation by a medical expert to contain no materials in sufficient quantities to be toxic or injurious to humans, including children, or to cause acute or chronic health problems. Children in grade six and lower, and adults who may not be able to read and understand safety labeling should use only non-toxic materials. The AP Seal ensures products are non-toxic when used as intended for young children, the physically or mentally handicapped, and any persons who cannot read or understand the safety labeling on product packages.
